Backyard water play, on your hours

Control Freak Splash Home

Push the button.
Let the pad play.

Chase, all on or random. Set opening hours, start a cycle from the app and let the controller close the supply when play stops.

Try the demo Join the beta

Home Assistant built in No subscription A complete kit on its own

LOCAL Rules running on the controller Keeps working without internet

Concept

Control Freak Splash Home, brought to you by Control Freak

Concept: a product in development. Design, contents, and features may change. Demo values are simulated.

Sound familiar?

Less turning valves. More backyard time.

Still starting every feature by hand?

Press the button to start a timed cycle inside the hours you set. Choose Chase, All on or Random.

Water running after play stops?

The master valve closes when the pattern stops. Flow when closed triggers a shutdown and an alert.

Worried about the water bill?

Water only flows after a button press, inside the hours you set, and the app shows how many minutes it ran today.

How it works

A button press starts the fun.

Connect your pad

Your installer connects the feature valves, button, supply flow switch and outdoor air sensor.

Choose your hours

Set a pattern, cycle length and opening hours. The app can start a cycle if the button breaks.

Let the rules run

The master valve opens while a pattern runs and closes when play stops. Flow alarms and freeze watch close the supply.

What makes it different

The pad follows your day.

Three ways to play

Chase, All on and Random patterns bring your spray features together, with staggered valve changes.

Know the run time

See today’s water use as run minutes. A flow switch reports flowing or not flowing, rather than measured gallons.

Rules stay at home

A Wi-Fi or internet drop changes nothing about the controller’s rules. Phone alerts need internet.

What’s included

A complete kit on its own.

Controller and connections

Controller with Home Assistant built in, feature valve connections, button input and power supply.

The readings it uses

Supply flow switch and outdoor air sensor, with outputs for your feature valves and master valve.

Your pad, connected

Valves, button and plumbing are not included. If a Control Freak controller you already have has a free port or relay, Home Assistant can put it to work for this product too. Ask your installer about the setup.

Home Assistant

Your backyard, together.

Home Assistant built in

Bring pad readings and controls into your home network alongside your other connected equipment.

Choose how you hear

Alerts by push, text, email or alarm. Phone alerts need internet. An alarm needs connected alarm equipment.

No subscription

Patterns, hours and shutdown rules run on the controller. Every Control Freak product is a complete kit on its own.

Through Home Assistant and its companion app, it works with Google Home, Siri, CarPlay and Alexa: ask Alexa or Siri whether the pad is running, tell Google Home to close the pad for the day, check it from CarPlay, and get voice alerts when something is out of balance.

Honest limits

For a home pad. With clear limits.

Home pads only

Not for commercial or public splash pads. Your installer handles suitable plumbing and drainage.

Controls, not water treatment

It does not treat or recirculate water, and it does not correct low supply pressure.

Winterizing is still yours

A freeze watch closes the supply when the air gets cold. It does not drain or winterize your plumbing.

Try it here

Your pad. Your pattern.

Start a cycle, change the pattern or try a demo alert. All readings are simulated.

Open full demo

Join the beta

Make room for a little more play.

Have a backyard splash pad? Tell us about your features and the control you wish you had.